Angle-head cylindrical grinder

Purpose and application

Machines of this model series are designated for simultaneous grinding of faces and joining cylindrical or cone surfaces by plunge grinding in semi-automatic mode, under batch and mass production conditions.
Machines can carry out the following types of grinding:
- Plunge grinding in semi-automatic mode “until tight”;
- Plunge grinding in semi-automatic mode with cycle finishing by in-process gage.
Machines are equipped with axis controller of grinding wheel. It possesses grinding stone balancer and peak-to-peak electronic control indicator. Peripheral and face adjustment of grinding stone is copy automatic using hydraulic adjustment device, diamond dressers.
Grinding wheel feed is driven by asynchronous electric alternating current motor controlled by axis controller. Such system is easy to operate and set, does not require special operator’s training. It significantly eases machine operation, increases productivity and ensures high processing precision.
Machines are delivered set for particular Customer’s grinding technique.

Main technical characteristics

Parameters	Unit of measure	Model designation
Parameters	Unit of measure	3Т160М	3Т161М	ХШ4-12М
Maximum diameter of the installed product: - diameter - length	mm	280 150	280 700
Dementions of grinding whee: - diameter - height	mm	750 130		750 125
Maximum weight of the installed product	kg	50	200
Cutting speed	m/sec	50
Dementions with separately located equipment: - lenght - width	mm	3750 4600	3750 4675	3605 4730
Weight	kg	7900	8150	7800